products

home page / products / gypsum powder / Derzonat - Joint & Filling Plaster
gypsum powder
Derzonat - Joint & Filling Plaster

Derzonat has high strength high strength and flexibility. It is an effective, flexible and decorative filling material for filling the joints of gypsum boards and tiles.


Derzonat Trademark Registration Certificate
Derzonat TSE Certificate
Physical Form white powder
Plaster/Water Proportion 10 Kg for 5.5-6 Lt Water
Usage Time 80-100 minutes
Freezing Time 160-200 minutes
Consumption Amount 0.2 – 0.4 Kg/m³ (every 1 cm thickness)
Compressive Strength 4.0 N/mm² (4x4x16 blocks)
Flexural Strength 1.0 N/mm² (4x4x16 blocks)
Dry Unit Weight 680-720 Kg/m³
Fire Response A1 (TS EN 13279-1)
Related Standard TSE EN 13963

SURFACE AND ENVIRONMENT DURING THE APPLICATION
-The installation work on the plasterboard must be completed before using DERZONAT. -The temperature in the environment should be between +5C and +40 C during the application. -There should not be air flow or circulation during the application as well.

APPLICATION
5,5-6 liters of clean water is poured into the mortarboard to be mixed. 10 kg of DERZONAT poured into it by sprinkling. It is waited yerine it is awaited about 2-3 minutes to make sure the plaster absorbs the water. It is mixed with a mixer or trowel until a homogeneous mixture is obtained. If self-adhesive joint tape will be used; the first layer will be applied after the tape stuck, if self-adhesive joint tape is not used; the first layer of DERZONAT is applied to fill the gaps between the joints and the second layer is applied by pulling joint tape on it. After DERZONAT drying, it is possible smoothen the surfaces if it is necessary.

PACKAGING
Polypropylene bag 30 kg (+- 2%)

STORAGE
Maximum 20 bags should be stockpiled on top of each other in a dry place, and the bags should be stored in such a way that they do not come into contact with the ground and are protected from moisture and condensation. It should be used within 9 months from the date of manufacture.