home page / products / gypsum powder / Makonat Eko - Machine Plaster
gypsum powder
Makonat Eko - Machine Plaster

Makonat is applied on bricks , concretes, gas concretes, pumice blocks etc. It is a bagged gypsum-based ready to use plaster that can be applied directly on materials with a machine. It is an A1 class fireproof material that provides sound insulation.

Makonat Eco Trademark Registration Certificate
Makonat Eco Tse Certificate
Physical Form white powder
Plaster/Water Ratio 10 Kg for 4-5 Lt Water
Usage Period 130-180 Minutes
Freezing Time 250-300 Minutes
Dry Unit Weight 900-1000 Kg/m3
Consumption Amount 11-12 Kg/m2 (Each 1 cm Thickness)
Compressive Strength ≥ 2.0 N/mm2
Flexural Strength ≥ 1.0 N/mm2
Bond Strength -
Response to Fire Class A1
Related Standard TS EN 13279-1.2 (Type B4- Machine applied)

It should be free from dirty materials such as dust, oil, paint. Extremely dry, hot and highly absorbent surfaces should be moistened with water. The surface of the ceilings should be roughened or primed with a material that allows the mortar stick to the surface. There should not be air flow or circulation in the environment during the application. Application temperature should be between +5 and +40 oC.

It is prepared in the plaster machine with the enough proportion of plaster/water (4-5 lt water / 10 kg MAKONATEKO). The mortar is sprayed on the surface with the machine. The application thickness is determined with the help of slabs according to the smoothness of the surface. When the surface reaches a consistency that will not collapse when lightly pressed with a finger, trifiling is done.
After the trifiling process, the surface is made ready for painting by polishing again with a steel trowel.

Polypropylene bag 35 kg ( ± 2 % )

Maximum 15 bags should be stockpiled on top of each other in a dry place. The bags should be stored in such a way that they do not touch the ground and be protected from moisture and condensation. It should be used within 6 months from the production date.