home page / products / gypsum powder / Satonat - Satin Finishing Plaster
gypsum powder
Satonat - Satin Finishing Plaster

Satonat- Satin Finishing Plaster an under paint yerine a last coat finishing plaster with highly adhesive. It can be applied on the plaster surfaces plastered by PERONAT or MAKONAT, or on plasterboard surfaces.

Satonat Trademark Registration Certificate
Satonat TSE Certificate
Physical Form white powder
Plaster/Water Ratio 10 Kg for 7 Lt of Water
Usage Time 120-160 minutes
Freezing Time 300-350 minutes
Consumption Amount 0.2 – 0.4 Kg/m3 (every 1 cm thickness)
Compressive Strength 3.0 N/mm² (4x4x16 blocks)
Flexural Strength 1.0 N/mm² (4x4x16 blocks)
Dry Unit Weight 680-720 Kg/m³
Response to Fire A1 (According to TS EN 13279-1)
Related Standard TSE EN 13279-1.2 (Type C6, Light Applicable Plaster)

-It should be free from dirty materials such as dust, oil, paint. -Extremely dry, hot and highly absorbent surfaces should be moistened with water. -There should not be air flow or circulation during the application, care should be taken to avoid air flow and drafts. -Application temperature should be +5 to +40 C

6.5-7 liters of water is poured into the container in order to mix. Satonat Satin Finish Plaster is added by sprinkling. It is awaited about 2-3 minutes to make sure the plaster absorbs the water. It is mixed with a hand mixer or trowel until a homogeneous mixture is obtained. The ready-to-use mortar is applied to the surface with the help of a steel trowel.

Polypropylene bag 30 kg (+- 2%)

Maximum 20 bags should be stockpiled on top of each other in a dry place, and the bags should be stored in such a way that they do not come into contact with the ground and are protected from moisture and condensation. It should be used within 9 months from the date of manufacture.