home page / products / gypsum powder / Karonat - Moulding Plaster
gypsum powder
Karonat - Moulding Plaster

Karonat - Moulding Plaster

It is a building plaster used in the production of decorative materials such as papier-mâché, core, niche, jamb and sculpture. KARONAT can be used both in plaster molding and plastering paste.

Karonat Trademark Registration Certificate Karonat Trademark Registration Certificate
Physical Form white powder
Plaster/Water Ratio 100gr gypsum / 70gr water
Usage Time 7-12 minutes
Freezing Time 20-30 minutes
Compressive Strength 8 N/mm² (after 7 days)
Flexural Strength 1.0 N/mm² (after 7 days)
Unit Volume Weight 650-700 gr/lt
Grain Size Over 50 16-18% *Over 160% 0-1.0% PH: 7-8
Surface Hardness 60 shore D
Standard TSE EN 13279-1.2 (Type C1, Fiber reinforced, building plaster for plaster elements)

-It must be free from dirty materials such as dust, oil, paint. -Extremely dry, hot and highly absorbent surfaces should be moistened with water. -The surface of the ceilings should be roughened before applying the plaster or primed with a material that allows the mortar to adhere to the surface. Care should be taken to avoid drafts.-Application temperature should be between +5 and +40 C.

6,5 – 7 liters of water is poured into the container to be mixed, and Karonat Papier-mâché Plaster is added by sprinkling it. It is waited for about 2-3 minutes for the plaster to absorb the water. It is mixed with a hand mixer or trowel until a homogeneous mixture is obtained. The prepared mortar is poured into the mold that has been lubricated beforehand. After a layer is poured, fiber or hemp is laid on the plaster to increase the flexibility and strength of the mold. Plaster is poured over the laid fiber or hemp again. The plaster poured into the mold will begin to heat up after a while. The plaster, which is heated and cooled, leaves itself from the mold after a while. The plaster removed from the mold is left to dry for a while at room temperature before assembly.

Polypropylene bag 30 kg (+- 2%)

Maximum 20 bags should be stacked on top of each other in a dry place, and the bags should be stored in such a way that they do not come into contact with the ground and are protected from moisture and condensation. It should be used within 9 months from the date of manufacture.